XP DE UNUTULAN KULLANICI ŞİFREİSİNİ MS-DOS dan KIRMAK

Windows altından yapmak bir dünya zaman alıyor. MS-Dosdan Kırılması için Yapılması gerekenler şunlardır:
1-bd050303.zip programını yükleyin.
2-install dosyasını çalıştırın
3-disket sürücüye formatlanmış bir disket yerleştirin
4-a: yazıp Enter a basın.
5-Bilgisayarı Bu disketle açın.
Karşınıza Msdos ortamında altdaki bölüm gelecektir.
1. DISK SELECT

Which disk contains your Windows system?


================================================== =======. Step ONE: Select disk where the Windows installation is================================================ =========Disks isk /dev/ide/host0/bus0/target0/lun0/disc: 2147 MB, 2147483648 bytesNT partitions found: 1 : /dev/ide/host0/bus0/target0/lun0/part1 2043MB BootPlease select partition by number ora = show all partitions, d = automatically load new disk driversm = manually load new disk driversl = relist NTFS/FAT partitions, q = quit 1 yazın ve Enter a basın
2. HOW TO MANUALLY LOAD DRIVERS

==== DISK DRIVER / SCSI DRIVER select ====You may now insert or swap to the SCSI-drivers floppyPress enter when done: Found 1 floppy drivesFound only one floppy, using it..Selected floppy #0Mounting it..Floppy selection done..SCSI-drivers found on floppy:1 BusLogic.o.gz2 aic7xxx.o.gz3 sym53c8xx.o.gz[ ... ]SCSI driver selection: a - autoprobe for the driver (try all) s - swap driver floppy q - do not load more drivers or enter the number of the desired driverSCSI driver select: [q] SCSI driver select: [q] a[ BusLogic.o.gz ]Using /tmp/scsi/BusLogic.oPCI: Found IRQ 11 for device 00:10.0scsi0: *** BusLogic BT-958 Initialized Successfully ***scsi0 : BusLogic BT-958 Vendor: FooInc Model: MegaDiskFoo Rev: 1.0 Type: Direct-Access Attached scsi disk sda at scsi0, channel 0, id 0, lun 0SCSI device sda: 8388608 512-byte hdwr sectors (4295 MB)Partition check: /dev/scsi/host0/bus0/target0/lun0: p1Driver BusLogic.o.gz loaded and initialized.

Bu bölümde "a" yazıp Enter a basın

3. PATH AND FILE SELECT

Selected 1Mounting on /dev/ide/host0/bus0/target0/lun0/part1NTFS volume version 3.1.Filesystem is: NTFS============================================== ===========. Step TWO: Select PATH and registry files============================================= ============What is the path to the registry directory? (relative to windows disk)[windows/system32/config] : -r-------- 1 0 0 262144 Jan 12 18:01 SAM-r-------- 1 0 0 262144 Jan 12 18:01 SECURITY-r-------- 1 0 0 262144 Jan 12 18:01 default-r-------- 1 0 0 8912896 Jan 12 18:01 software-r-------- 1 0 0 2359296 Jan 12 18:01 systemdr-x------ 1 0 0 4096 Sep 8 11:37 systemprofile-r-------- 1 0 0 262144 Sep 8 11:53 userdiffSelect which part of registry to load, use predefined choicesor list the files with space as delimiter1 - Password reset [sam system security]2 - RecoveryConsole parameters [software]q - quit - return to previous
Bu bölümde Windowsun kurulu olduğu partitionu seçeceğiz "1" yazıp Enter a basın

4. PASSWORD RESET

================================================== =======. Step THREE: Password or registry edit============================================== ===========chntpw version 0.99.2 040105, (c) Petter N Hagen* SAM policy limits:Failed logins before lockout is: 0Minimum password length : 0Password history count : 0<>========<> chntpw Main Interactive Menu <>========<>Loaded hives: <sam> <system> <security> 1 - Edit user data and passwords 2 - Syskey status & change 3 - RecoveryConsole settings - - - 9 - Registry editor, now with full write support! q - Quit (you will be asked if there is something to save)What to do? [1] -> 1===== chntpw Edit User Info & Passwords ====RID: 01f4, Username: <Administrator>RID: 01f5, Username: <Guest>, *disabled or locked*RID: 03e8, Username: <HelpAssistant>, *disabled or locked*RID: 03eb, Username: <pnh>, *disabled or locked*RID: 03ea, Username: <SUPPORT_388945a0>, *disabled or locked*Select: ! - quit, . - list users, 0x<RID> - User with RID (hex)or simply enter the username to change: [Administrator]
Biz Administrator şifresini editleyeceğimizden burayı görünce hiçbirşey yapmadan Enter a basıyoruz.

Here you can enter the username you want to reset the password for. NOTE: It is case-sensitive, write it exact as listed (without the < and > of course)

Or if the name uses some characters that cannot be displayed, enter it's ID number (RID), like this: 0x1f4 would select administrator.



RID : 0500 [01f4]Username: Administratorfullname: comment : Built-in account for administering the computer/domainhomedir : Account bits: 0x0210 =[ ] Disabled | [ ] Homedir req. | [ ] Passwd not req. | [ ] Temp. duplicate | [X] Normal account | [ ] NMS account | [ ] Domain trust ac | [ ] Wks trust act. | [ ] Srv trust act | [X] Pwd don't expir | [ ] Auto lockout | [ ] (unknown 0x08) | [ ] (unknown 0x10) | [ ] (unknown 0x20) | [ ] (unknown 0x40) | Failed login count: 0, while max tries is: 0Total login count: 3* = blank the password (This may work better than setting a new password!)Enter nothing to leave it unchangedPlease enter new password: Buraya yeni Şifre girilecek örn:123456

Blanking password!

Do you really wish to change it? (y/n) [n] y yazıp Enter a basacağız
Changed!


Select: ! - quit, . - list users, 0x - User with RID (hex)
or simply enter the username to change: [Administrator] "!" yazılacak Enter a basacağız


! brings us back to the main menu here.

<>========<> chntpw Main Interactive Menu <>========<>Loaded hives: 1 - Edit user data and passwords 2 - Syskey status & change 3 - RecoveryConsole settings - - - 9 - Registry editor, now with full write support! q - Quit (you will be asked if there is something to save)What to do? [1] -> "q" yazıp Entera basacağız

5. WRITING OUT THE CHANGES

Everything has been done, time to commit the changes.


Hives that have changed: # Name 0 - OK================================================ =========. Step FOUR: Writing back changes=========================================== ==============About to write file(s) back! Do it? [n] :
"y" yazıp Entera basacağız

Writing samNOTE: A disk fixup will now be done.. it may take some timeMounting volume... OKProcessing of $MFT and $MFTMirr completed successfully.NTFS volume version is 3.1.Setting required flags on partition... OKGoing to empty the journal ($LogFile)... OKNTFS partition /dev/ide/host0/bus0/target0/lun0/part1 was processed successfully.NOTE: Windows will run a diskcheck (chkdsk) on **** boot.NOTE: this is to ensure disk intergity after the changes***** EDIT COMPLETE *****You can try again if it somehow failed, or you selected wrongNew run? [n] :
SON olarak "n" yazıp Enter a basacağız ve disketi çıkartıp ctrl+alt+del tuşlarına basacağız Windows açılınca administrator gözükürse herzamanki gibi hesabın üzerine tıklayıp 123456 yazıp girin. Hesap gözükmüyorsa iki kez ctrl+alt+del ctrl+alt+del yapacağız karşımıza Kullanıcı adı parola ekranı çıkacak
kullanıcı adına Administrator parola=123456 Yazın ve aaa Adminden girdiniz...
kolay gelsin..